User Manual of DS-7200HVI/HFI-SH Series DVR
7.
Select the Group number for the current HDD.
Note:
The default group No. for each HDD is 1.
8.
Click the O K button to confirm the settings.
9.
In the pop-up Attention box, click the Y es button to finish the settings.
10.3.2 Setting HDD Property
Purpose:
The HDD property can be set to redundancy, read-only or read/write (R/W). Before setting the HDD property,
please set the storage mode to Group (refer to step1-4 of Chapter 10.3.1 S etting H D D Groups ).
A HDD can be set to read-only to prevent important recorded files from being overwritten when the HDD becomes
full in overwrite recording mode.
When the HDD property is set to redundancy, the video can be recorded both onto the redundancy HDD and the
R/W HDD simultaneously so as to ensure high security and reliability of video data.
Steps:
1.
Enter the HDD Information interface.
Menu > HDD > General
2.
Select HDD from the list and click the
Figure
1 0.12
L ocal
H DD
S ettings
I nterface
Figure
1 0.
1 3
C onfirm
H DD
G roup
S ettings
icon to enter the Local HDD Settings interface.
136