Temperature and Humidity
Maintain the specified temperature and humidity even when the machine is not in use. Failure to do
so may result in malfunction.
• During operation: Temperature: 20 to 32°C (68 to 90°F), humidity: 35 to 80%RH (no condensation)
• During non-operation: Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80%RH (no condensation)
Installation Space and Height
The space shown in the figure is required in order to use this machine.
1,710 mm (67.3 in.)
1,210 mm (47.6 in.)
Unit space
Work space
Air Ventilation
This machine emits a small amount of volatile compounds during printing and for some time after
printing, which may cause irritation of your eyes, nose, and throat. To use this machine, make sure
to install ventilating equipment to ensure adequate ventilation.
For installation of a ventilation machine, contact your authorized Roland DG Corporation dealer.
Deciding On an Installation Environment
Do not install the machine at
a height of 0.6 m (23.6 in.) or
more above the work floor.
This machine is desktop type.
Install the machine in a location
that allows easy access to areas
such as the power switch and
other controls during operation.
2.Installation
21