[Audio Setting]; [Off] - Panasonic PT-VW530 Operating Instructions Manual

f The [FUNCTION BUTTON] screen is displayed.
3) Press the <ENTER> button.
4) When the confirmation message is displayed, select [OK] and press the <ENTER> button.
Note
f You can also cancel the assigned settings by displaying the on-screen menu, selecting the menu item to be canceled (main
menu, submenu, or details menu), and then pressing the <FUNCTION> button for at least 3 seconds.

[AUDIO SETTING]

You can perform more detailed setting for Audio.
Adjusting the volume
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select [VOLUME].
4) Press qw to adjust the level.
Operation
Press the w button.
Press the q button.
Setting the mute
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select [MUTE].
4) Press qw to switch the item.

[OFF]

[ON]
Setting the audio output during standby
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select [IN STANDBY MODE].
4) Press qw to switch [IN STANDBY MODE].
f The items will switch each time you press the button.
[OFF]
[ON]
Note
f When [ECO MANAGEMENT] → [STANDBY MODE] is set to [ECO] (x page 73), even if [IN STANDBY MODE] is set to
[ON], audio cannot be output during standby.
Setting audio input selection
Choose the audio input terminal for each input signal.
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
74 - ENGLISH
Chapter 4 Settings - [PROJECTOR SETUP] menu
Adjustment
Increases the volume.
Decreases the volume.
Audio is output.
Audio is not output.
Disables audio output in the standby mode.
Enables audio output in the standby mode when [STANDBY MODE] is set to [NORMAL]. At this
time, press the <VOL - / VOL +> buttons on the remote control or qw buttons on the control
panel to adjust the volume.
Range
0 ~ +63