About Your Projector; Remote Control - Panasonic PT-VW530 Operating Instructions Manual

About your projector

Remote control

1
2
3
4
5
6
7
8
9
10
11
1 Power button <v/b>
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when
the power is switched off (standby mode).
2 <COMPUTER 1> button
Switches the COMPUTER1 signal to project.
3 <COMPUTER 2> button
Switches the COMPUTER2 signal to project.
4 <HDMI 1> button
Switches the HDMI1 signal to project.
5 <HDMI 2> button
Switches the HDMI2 signal to project.
6 <ENTER> button/asq w buttons
Navigate the menu display.
7 <MENU> button
Displays or hides the main menu. (x page 46)
8 <DEFAULT> button
Resets the content of the sub-menu to the factory
default. (x page 47)
9 <FREEZE> button
Pauses the projected image and mute the audio
temporarily. (x page 42)
10 <ID SET> button
Sets the ID number of the remote control to use for a
system using multiple projectors. (x page 43)
11 Number buttons
Act as number buttons. Use these buttons when setting
the remote control codes or entering the password.
12 Remote control signal transmitter
Chapter 1 Preparation - About your projector
12
13
14
15
16
17
18
19
20
21
13 <AUTO SETUP> button
Automatically adjusts the image display position while
projecting the image. (x page 40)
14 <VIDEO> button
Switches the VIDEO signal to project.
15 <RETURN> button
Return to the previous menu or cancel the setting.
16 <FUNCTION> button
Assigns a frequently used operation as a shortcut button.
(x page 41)
17 <MUTE> button
Used to mute the audio. (x page 43)
18 <ID ALL> button
Used to simultaneously control all the projectors with one
remote control for a system using multiple projectors.
(x page 43)
19 <AV MUTE> button
Used to turn off the audio and video temporarily.
(x page 43)
20 <D.ZOOM +/-> buttons
Zoom in and out the images. (x page 42)
21 <VOL +/-> buttons
Adjusts the volume of the built-in speaker or audio
output.
22 <P-TIMER> button
Operate the P-TIMER function. (x page 43)
23 <SCREEN ADJ> button
You can correct various types of distortion in a projected
image. (x page 40)
22
23
ENGLISH - 19