Accessing From The Web Browser - Panasonic PT-VW530 Operating Instructions Manual

Note
f Please confirm with your network administrator before you connect to an existing network.
f The following settings are set before the projector leaves the factory.
Computer setting
1) Turn on the computer.
2) Make the network setting according to your system administrator.
f If the projector settings are the default settings, the computer can be used with the following network settings.

Accessing from the web browser

1) Start up the web browser on the computer.
2) Enter the IP address set on the projector into the URL entry field of the web browser.
3) Enter the user name and the password.
f The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is
panasonic (lower case).
4) Click [OK].
f The [Projector status] page is displayed.
Chapter 4 Settings - [NETWORK] menu
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[DNS1] / [DNS2]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
OFF
192.168.10.100
255.255.255.0
192.168.10.1
NULL
192.168.10.101
255.255.255.0
192.168.10.1
ENGLISH - 83