Table of Contents
Advertisement
[REMOTE2 MODE]
Set the <REMOTE 2 IN> terminal.
1)
Press as to select [REMOTE2 MODE].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT]
[USER]
[F/W SERIES]
f When [USER] is selected, proceed to Step 3).
3)
Press the <ENTER> button.
4)
Press as to select one from [PIN2] to [PIN8], and press qw to switch the setting.
[FUNCTION BUTTON]
Set the functions of the <FUNCTION> button on the remote control.
1)
Press as to select [FUNCTION BUTTON].
2)
Press the <ENTER> button.
f The [FUNCTION BUTTON] screen is displayed.
3)
Press as to select a function.
[DISABLE]
[SUB MEMORY]
[SYSTEM SELECTOR]
[DAYLIGHT VIEW]
[TEST PATTERN]
4)
Press the <ENTER> button.
[AUDIO SETTING]
Set audio functions in detail.
Adjusting the volume
1)
Press as to select [AUDIO SETTING].
2)
Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3)
Press as to select [VOLUME].
4)
Press qw to adjust the level.
Operation
Press w.
Press q.
Adjusting the left to right audio balance
1)
Press as to select [AUDIO SETTING].
2)
Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3)
Press as to select [BALANCE].
90 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
The pin assignment of the <REMOTE 2 IN> terminal is used by the factory default setting of the
projector.
Used to change the setting of the <REMOTE 2 IN> terminal.
The setting of the <REMOTE 2 IN> terminal is used for the F/W series compatibility.
Disables the <FUNCTION> button.
Displays the sub memory list. (x page 101)
Switches the [SYSTEM SELECTOR] setting. (x page 64)
Switches the [DAYLIGHT VIEW] setting. (x page 64)
Displays the test pattern built-in to the projector. (x page 98)
Increases the volume.
Decreases the volume.
Adjustment
Range of adjustment
0 - 63
Advertisement
Table of Contents
