[Text Display]; [Text Change]; [Menu Lock]; [Menu Lock Password] - Panasonic PT-VW530 Operating Instructions Manual

Hide thumbs Also See for PT-VW530:
Table of Contents

Advertisement

Note
f The entered password is displayed with "" mark on the screen.
f An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.
f If numbers have been used for the security password, the security password will need to be initialized again if the remote
control is lost. Consult your dealer for the initialization method.

[TEXT DISPLAY]

Overlap the security message (text) over the projecting image.
1)
Press as to select [TEXT DISPLAY].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]

[TEXT CHANGE]

Change the text displayed when the text display is enabled by selecting [ON] in [TEXT DISPLAY].
1)
Press as to select [TEXT CHANGE].
2)
Press the <ENTER> button.
f The [TEXT CHANGE] screen is displayed.
3)
Press asqw to select the text, and press the <ENTER> button to enter the text.
4)
Press asqw to select [OK], and press the <ENTER> button.
f The text is changed.

[MENU LOCK]

Display the menu by the <MENU> button and set whether or not to enable menu operations.
1)
Press as to select [MENU LOCK].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Note
f When the entered password is incorrect after setting [MENU LOCK] to [ON], the <MENU> button cannot be operated.
f [MENU LOCK] is set to [OFF] at the time of purchase or when [INITIALIZE ALL] is executed.
f When [MENU LOCK] is set to [ON] and then enter the password to release the lock, the unlock state is held until the
projector enters the standby mode.

[MENU LOCK PASSWORD]

Change the menu lock password.
1)
Press as to select [MENU LOCK PASSWORD].
2)
Press the <ENTER> button.
f The [MENU LOCK PASSWORD] screen is displayed.
3)
Press asqw to select the text, and press the <ENTER> button to enter the text.
f Up to 16 characters can be input.
4)
Press asqw to select [OK], and press the <ENTER> button.
f To cancel, select [CANCEL].
Attention
f The initial password is "AAAA" at the time of purchase or when [INITIALIZE ALL] is executed.
f Change the password periodically that is hard to guess.
78 - ENGLISH
Chapter 4 Settings - [SECURITY] menu
Disables the text display.
Enables the text display.
Unlocks menu operations.
Locks menu operations.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-vz570Pt-vx600Pt-vz570a

Table of Contents