[Emulate]; [Function Button]; [Default] - Panasonic PT-VW530 Operating Instructions Manual

2) Press qw to set the timer (5-120 MIN.).
f The time will switch each time you press the button.
Setting [STANDBY MODE] in step 3)
Set the power consumption during standby.
1) Press as to select [STANDBY MODE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[ECO] Restricts some functions in the standby mode to reduce power consumption.
[NORMAL] Does not restrict network function and serial communication function even in the standby mode.
Note
f If [STANDBY MODE] is set to [ECO], you cannot use network functions when the projector is standing by. Also, you cannot
use some RS-232C protocol commands.
f When set to [ECO], it may take approx. 10 seconds longer before the projector starts projecting after the power is turned on,
compared with when [NORMAL] is set.
f When set to [NORMAL], it may take approx. 1 minute to enable the network function after connecting the power cord.
f The setting of [STANDBY MODE] cannot be returned to the factory default even if the [PROJECTOR SETUP] menu →
[INITIALIZE ALL] is executed. (x page 76)

[EMULATE]

When controlling the projector on a computer via the <SERIAL IN> terminal, set use of control commands on a previously
purchased Panasonic projector. This allows the control software for an existing Panasonic projector to be inherited and used.
1) Press as to select [EMULATE].
2) Press the <ENTER> button.
f The [EMULATE] screen is displayed.
3) Press as to select the desired item.
VZ575N series, VW535N series, VX605N series, VZ570 series, VW530 series, VX600 series,
VX60, EZ580 series, EW640 series, EX610 series, EW540 series, EX510 series, VW345N series,

[DEFAULT]

VX415N series, VW340Z, VX410Z, VX42Z, VX406EA, VX46EA, EZ770 series, EW730 series,
EX800 series, RZ475 series, RZ470 series, RW430 series, RZ370 series, RW330 series
[D3500] D3500 series
[D4000] D4000 series
[D/W5k SERIES] D5700 series, DW5100 series, D5600 series, DW5000 series, D5500 series
DZ770 series, DW740 series, DX810 series, DZ680 series, DW640 series, DX610 series,
[D/W/Z6k SERIES]
DW730 series, DX800 series, DZ6710 series, DZ6700 series, DW6300 series, D6000 series,
D5000 series, DZ570 series, DW530 series, DX500 series
[L730 SERIES] L730 series, L720 series, L520 series
[L780 SERIES] L780 series, L750 series
[L735 SERIES] L735 series
[L785 SERIES] L785 series
[F/W SERIES] FW430 series, FX400 series, FW300 series, F300 series, F200 series, FW100 series, F100 series
[LZ370] LZ370 series
LB3 series, LB2 series, LB1 series, ST10 series, LB90 series, LW80NT series, LB80 series,
[LB/W SERIES]
LB78 series, LB75 series
VW435N series, VW440 series, VW430 series, VX505N series, VX510 series, VX500 series,
[VX500 SERIES]
VW330 series, VX400NT series, VX400 series, VX41 series
[EZ570 SERIES]
EZ570 series, EW630 series, EW530 series, EX600 series, EX500 series
[VW431D]
VW431D series
4) Press the <ENTER> button.

[FUNCTION BUTTON]

The function assigned to the <FUNCTION> button of the remote control is displayed. You can also release the assigned
setting.
Releasing assigned function to the <FUNCTION> button
1) Press as to select [FUNCTION BUTTON].
2) Press the <ENTER> button.
Chapter 4 Settings - [PROJECTOR SETUP] menu
ENGLISH - 73