[Audio Setting] - Panasonic PT-FRZ50 Operating Instructions Manual

[SYSTEM SELECTOR]
[DAYLIGHT VIEW]
[WAVEFORM MONITOR]
4) Press the <ENTER> button.

[AUDIO SETTING]

Set audio functions in detail.
Adjusting the volume
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select [VOLUME].
4) Press qw to adjust the level.
Operation
Press w .
Press q .
Adjusting the left to right audio balance
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select [BALANCE].
4) Press qw to adjust the level.
Operation
Press w .
Press q .
Setting audio output in the standby mode
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select [IN STANDBY MODE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Note
f No audio is output in the standby mode when the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to
[ECO].
Setting audio output while using the shutter function
1) Press as to select [AUDIO SETTING].
106 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Switches the [SYSTEM SELECTOR] setting. ( x page 67)
Switches the [DAYLIGHT VIEW] setting. ( x page 66)
Displays the waveform of the input signal. ( x page 92)
Increases the volume.
Decreases the volume.
Increases the volume on the right.
Increases the volume on the left.
No audio is output during standby.
Audio is output during standby.
Adjustment
Adjustment
Range of adjustment
0 - 63
Range of adjustment
L16 - R16