[Projector Setup] Menu; [Status]; [Computer1 Input Setting]; [Computer2 Select] - Panasonic PT-VW530 Operating Instructions Manual

[PROJECTOR SETUP] menu

On the menu screen, select [PROJECTOR SETUP] from the main menu, and select an item from the submenu.
Refer to "Navigating through the menu" (
fAfter selecting the item, press asqw to set.

[STATUS]

You can check the using status of the projector.
1) Press as to select [STATUS].
2) Press the <ENTER> button.
f The [STATUS] screen is displayed.
[SIGNAL]
[RUNTIME]
*
1
[SERIAL NUMBER]
*1 The following conversion is required to calculate the rough estimate for lamp replacement.
A ×1 + B × 5/7
f A : Runtime which is displayed in [STATUS] screen → [RUNTIME] → [LAMP] → [NORMAL]
f B : Runtime which is displayed in [STATUS] screen → [RUNTIME] → [LAMP] → [ECO]
*2 The model No. of the optional lamp unit is subject to change without prior notice.

[COMPUTER1 INPUT SETTING]

Set whether to use the <COMPUTER 1 IN> terminal.
1) Press as to select [COMPUTER1 INPUT SETTING].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[RGB/YP P ] Select when you want to input the RGB or YP
B R
[Y/C] Select when you want to input a luminance signal and a color signal to <COMPUTER 1 IN> terminal.

[COMPUTER2 SELECT]

Set whether to use the <COMPUTER 2 IN/1 OUT> terminal.
1) Press as to select [COMPUTER2 SELECT].
2) Press qw to switch the item.
f The items will switch each time you press the button.
70 - ENGLISH
Chapter 4 Settings - [PROJECTOR SETUP] menu
Æ
page 46) for the operation of the menu screen.
[NAME]
[FREQUENCY]
[PROJECTOR]
[LAMP (ET-LAV400 )]
*
2
[NORMAL]
[ECO]
[PROJECTOR]
Formula for lamp replacement time (rough estimate)
Displays the name of input signal.
Displays the scanning frequency of input signal.
Displays the current usage time of projector.
Displays the model No. of the replacement lamp unit for this
projector.
Displays the lamp runtime when [LAMP POWER] is set to
[NORMAL] by actual time.
Displays the lamp runtime when [LAMP POWER] is set to
[ECO] by actual time.
Displays the serial number of the projector.
P (YC C ) signal to <COMPUTER 1 IN> terminal.
B R B R