[Digital Cinema Reality]; [Noise Reduction]; [Tv-System]; [Rgb/Yp B P R ] - Panasonic PT-VW530 Operating Instructions Manual

Note
f [DAYLIGHT VIEW] cannot be set to [AUTO] when the [PROJECTOR SETUP] menu → [PROJECTION METHOD] is set to
[REAR/DESK] or [REAR/CEILING].
f The [AUTO] mode may not function properly if an object is placed on the top of the projector.

[DIGITAL CINEMA REALITY]

(Only for movie-based signal input)
You can improve the vertical resolution of 2-2 and 2-3 pull down video.
This function is available only with the following signal inputs.
525i (480i), 625i (576i), 1125 (1080)/60i, 1125 (1080)/50i, VIDEO signal.
1) Press as to select [DIGITAL CINEMA REALITY].
2) Press qw or the <ENTER> button.
f The [DIGITAL CINEMA REALITY] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]

[NOISE REDUCTION]

(Only when the <VIDEO IN> terminal or <COMPUTER 1 IN> terminal
You can reduce noises when the input image is degraded and noise is occurring in the image signal.
1) Press as to select [NOISE REDUCTION].
2) Press qw or the <ENTER> button.
f The [NOISE REDUCTION] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
*1 When [COMPUTER1 INPUT SETTING] is set to [Y/C] (
Attention
f When this is set for an input signal with less noise, the image may look different from what it originally was. In such a case,
set it to [OFF].

[TV-SYSTEM]

(Only when the <VIDEO IN> terminal or <COMPUTER 1 IN> terminal
The projector will automatically detect the input signal, but you can set the color system manually when an unstable signal is
input. Set the color system matching the input signal.
*1 When [COMPUTER1 INPUT SETTING] is set to [Y/C] (
1) Press as to select [TV-SYSTEM].
2) Press qw or the <ENTER> button.
f The [TV-SYSTEM] individual adjustment screen is displayed.
3) Press qw to select the color system.
f The items will switch each time you press the button.
f Select among [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [PAL60] and [SECAM].
f Set it to [AUTO] normally. (Setting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N],
[SECAM], or [PAL60].)
[RGB/YP P ] / [RGB/YC
B R
Set it to [AUTO] normally. If images are not displayed correctly when this is set to [AUTO], set either [RGB], [YC
in accordance with the input signal.
1) Press as to select [RGB/YP
Chapter 4 Settings - [PICTURE] menu
Disables [DIGITAL CINEMA REALITY].
Enables [DIGITAL CINEMA REALITY].
Disables [NOISE REDUCTION].
Enables [NOISE REDUCTION].
C ]
B R
P ] or [RGB/YC
B R
is selected)
*1
Æ
page 70)
is selected)
*1
Æ
page 70)
C ].
B R
C ] or [YP P ]
B R B R
ENGLISH - 53