Controlling The Volume Of The Speaker; Using The Function Button; Switching The Input Signal - Panasonic PT-VW530 Operating Instructions Manual

Chapter 3 Basic Operations - Basic operations by using the remote control

Controlling the volume of the speaker

You can control the volume of the projector's speaker or audio output.
buttons
1) Press the <VOL +> button / <VOL -> button on the remote control.
f You can also press qw on the control panel.
<VOL +>
<VOL ->

Using the FUNCTION button

Some operations in the menu can be assigned to the <FUNCTION> button on the remote control so that it can be used as an
easy shortcut button.
button
1) Press the <FUNCTION> button on the remote control.
To assign functions to the <FUNCTION> button
1) Press the <MENU> button on the control panel or the remote control to display the menu items (main
menu, sub menu, or details menu) you want to assign.
f Refer to "Navigating through the menu" (x page 46) for the operation of the on-screen menu.
2) Press and hold the <FUNCTION> button for 3 seconds or more.
Note
f After settings have been completed, the assigned menu item (main menu, sub-menu, or details menu) will be displayed in
[ASSIGNED FUNCTION] of the operation guide under the menu.
f Perform the [PROJECTOR SETUP] menu → [FUNCTION BUTTON] (x page 73) when deallocating functions.

Switching the input signal

You can switch the input signals to project.
1) Press <COMPUTER 1>, <COMPUTER 2>, <VIDEO>, <HDMI 1> or <HDMI 2> button on the remote
control.
f You can also press the <INPUT SELECT> button on the control panel.
<COMPUTER 1>
<COMPUTER 2>*
1
<VIDEO>
<HDMI 1>
<HDMI 2>
*1 When [COMPUTER2 SELECT] is set to [COMPUTER1 OUT], if you press the <COMPUTER 2> button on the remote
control, the input signal cannot be changed and the message "KEY NOT APPLICABLE" will appear.
Increases the volume.
Decreases the volume.
buttons
Switch to COMPUTER1 input.
Switch to COMPUTER2 input.
Switch to VIDEO input.
Switch to HDMI1 input.
Switch to HDMI2 input.
ENGLISH - 41