Table of Contents
Advertisement
[D/W5k SERIES]
D5700 series, DW5100 series, D5600 series, DW5000 series, D5500 series
MZ670 series, DZ870 series, DW830 series, DX100 series, DZ780 series, DW750 series, DX820 series, DZ770
series, DW740 series, DX810 series, DZ680 series, DW640 series, DX610 series, DW730 series, DX800
[D/W/Z6k
series, DZ6710 series, DZ6700 series, DW6300 series, D6000 series, D5000 series, DZ570 series, DW530
SERIES]
series, DX500 series, RZ970 series, RW930 series, RX110 series, RZ770 series, RZ660 series, RW730 series,
RW620 series, RZ670 series, RW630 series, RZ575 series, RZ570 series
[L730 SERIES]
L730 series, L720 series, L520 series
[L780 SERIES]
L780 series, L750 series
[L735 SERIES]
L735 series
[L785 SERIES]
L785 series
[F/W SERIES]
FW430 series, FX400 series, FW300 series, F300 series, F200 series, FW100 series, F100 series
[LZ370]
LZ370 series
LB3 series, LB2 series, LB1 series, ST10 series, LB90 series, LW80NT series, LB80 series,
[LB/W SERIES]
LB78 series, LB75 series
VW435N series, VW440 series, VW430 series, VX505N series, VX510 series, VX500 series, VW330 series,
[VX500 SERIES]
VX400NT series, VX400 series, VX41 series
[EZ570 SERIES]
EZ570 series, EW630 series, EW530 series, EX600 series, EX500 series
[VW431D]
VW431D series
4)
Press the <ENTER> button.
[FUNCTION BUTTON]
The function assigned to the <FUNCTION> button of the remote control is displayed. You can also release the
assigned setting.
Releasing assigned function to the <FUNCTION> button
1)
Press as to select [FUNCTION BUTTON].
2)
Press the <ENTER> button.
f The [FUNCTION BUTTON] screen is displayed.
3)
Press the <ENTER> button.
4)
When the confirmation message is displayed, select [OK] and press the <ENTER> button.
Note
f You can also cancel the assigned settings by displaying the on-screen menu, selecting the menu item to be canceled (main menu, sub-
menu or details menu), and then pressing the <FUNCTION> button for at least 3 seconds.
[AUDIO SETTING]
You can perform more detailed setting for Audio.
Adjusting the volume
1)
Press as to select [AUDIO SETTING].
2)
Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3)
Press as to select [VOLUME].
4)
Press qw to adjust the level.
Operation
Press the w button.
Press the q button.
Adjusting the balance
1)
Press as to select [AUDIO SETTING].
Chapter 4 Settings - [PROJECTOR SETUP] menu
Adjustment
Increases the volume.
Decreases the volume.
Range
0 ~ 63
ENGLISH - 75
Advertisement
Table of Contents
