[Startup Logo]; [Auto Setup Setting]; [Signal Search]; [Back Color] - Panasonic PT-VW530 Operating Instructions Manual

r When [SCREEN FORMAT] is [16:9]
[CENTER]
[HIGH]
[LOW]
r When [SCREEN FORMAT] is [4:3]
(Only for PT-VZ570)
[CENTER]
[LEFT]
[RIGHT]

[STARTUP LOGO]

Set the logo display when the power is turned on.
1) Press as to select [STARTUP LOGO].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[DEFAULT LOGO] Displays the Panasonic logo.
[USER LOGO]
Note
f The startup logo will disappear in approximately 30 seconds.
f To create/register the [USER LOGO] image, use "Logo Transfer Software" included in the supplied CD-ROM.
f If you do not register the image of the [USER LOGO], the startup logo will not be displayed even if the [STARTUP LOGO] is
set to [USER LOGO].

[AUTO SETUP SETTING]

Set the automatic execution of AUTO SETUP.
The screen display position or signal level can be adjusted automatically without pressing the <AUTO SETUP> button on the
remote control or on the control panel on each occasion if you input unregistered signals frequently at meetings, etc.
1) Press as to select [AUTO SETUP SETTING].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[BUTTON]

[SIGNAL SEARCH]

When the power is turned on, this function automatically detects the terminal which signals are input and sets the function to
switch.
1) Press as to select [SIGNAL SEARCH].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Note
f If the [SIGNAL SEARCH] is set to [ON] when there is no signal input, press the <AUTO SETUP> button on the remote
control or on the control panel, this function automatically detects the terminal to which signals are input and then switches.

[BACK COLOR]

Set the display of the projected screen when there is no signal input.
1) Press as to select [BACK COLOR].
2) Press qw to switch the item.
Chapter 4 Settings - [DISPLAY OPTION] menu
The image which aspect ratio is 16:9 will displayed in the center.
The image which aspect ratio is 16:9 will displayed at the top.
The image which aspect ratio is 16:9 will displayed at the bottom.
The image which aspect ratio is 4:3 will displayed at the center.
The image which aspect ratio is 4:3 will displayed in the left.
The image which aspect ratio is 4:3 will displayed at the right.
Disables the startup logo display.
Displays the image registered by the user.
Enables the auto setup function when switching signals.
Enables the auto setup function only when the <AUTO SETUP> button is pressed.
Disables input detection automatically.
Enables input detection automatically.
ENGLISH - 67