How To Select The Information To Display - Furuno FMD-3100 Operator's Manual

• Quality of position
• The preview box provides a scaled-down image of the area selected. Click the im-
age to enlarge it.
• The [Attribute] window shows the attributes for the AIO area selected. To find infor-
mation about an attribute, click it to show its information in the [Description] box.
Information: Description of area (for example, danger area).
Object name: Object name (number)
Textual description: Full text of the Notice to Mariners (NtoM)
ENC affected: ENC affected by the NtoM
Included in updates: Date this item was updated ([Preliminary Notice] items only)
• [All INFO] checkbox: Check the box to show [Source indication] at the bottom of the
[Attribute] window. (The [All INFO] box becomes unselectable when checked.)
Note: The [Attributes] window of the [Chart Object] dialog box changes according to
the settings for [Attributes Display] in the [Basic Settings] menu.
5.5.5

How to select the information to display

Select what type of notices to display as follows:
1. Click the [DISP], [SET] and [Chart DISP] buttons on the InstantAccess bar™.
2. Click the [NtoM] tab.
3. In the [AIO] window, check the items to display.
4. Click the [Save] button to save settings then click the [Close] button to close the
menu.
5. VECTOR (S57) CHARTS
5-11