Canon LBP1760P Service Manual page 119

B. Pick-up Module
1. Removal from the printer
1) Remove the cassette.
2) Remove the right rear cover.
3) Remove the 5 screws.
4) Slide the video controller unit in the
direction of the arrow to remove it.
Screws Video controller unit
Figure 3-1-12
5) Disconnect the 2 connectors.
6) Remove the 7 screws, then the cover.
Screws Cover
Figure 3-1-13
7) Disconnect the connector.
Connector
Figure 3-1-14
8) Open the top cover.
9) Open the front cover.
10) Open the envelope feeder gear cover.
11) Remove the 2 screws.
Screws
Figure 3-1-15
CHAPTER 3
3 - 5