Canon LBP1760P Service Manual page 116

CHAPTER 3
2. Top cover unit
1) Open the front cover.
2) Remove the right rear cover
3) Open the face-up tray and remove the 2
screws.
Face-up tray Screws
Figure 3-1-3
4) Open the top cover.
5) Unhook the claw to remove the rod from
the top cover unit.
Rod
Figure 3-1-4
3 - 2
6) Remove the 2 screws.
7) Unhook the claw on the right front side
of the top cover.
8) While pressing down the delivery unit,
release the 3 claws and remove the top
cover unit.
Screws Claw
Claws Delivery unit
Top cover unit
Figure 3-1-5
9) Disconnect the connector from the
operation panel and remove the top
cover.