Canon LBP1760P Service Manual page 120

CHAPTER 3
12) Remove the screw and then the engine
module.
Screw Engine module
Pick-up module
Figure 3-1-16
3 - 6
C. Cooling Fan
1. Removal from the printer
1) Remove the top cover unit and the left
cover.
2) Disconnect the connector.
3) Unhook the 2 claws and remove the fan
filter and cooling fan.
Connector Claws
Fan filter Cooling fan
Figure 3-1-17
<Precautions on reassembly>
Install the fan so that the surface with label
faces inside and that the cable comes to the
left bottom, as shown below.
Figure 3-1-18