Separation Pad - Canon LBP1760P Service Manual

E. Separation Pad
1. Removal from the printer
1) Open the front cover.
2) Remove the multi-purpose tray.
3) Remove the envelope entrance cover.
4) Remove the multi-purpose tray pick-up
roller.
5) Disengage the 2 hooks of the separation
pad, then remove the 3 springs.
Hooks Springs
Figure 3-3-6
6) Pull out the separation pad with its claw
passing under the frame boss.
Claw Boss

Separation pad

Figure 3-3-7
<Precautions on reassembly>
Be sure that the 3 springs are properly set
when installing the separation pad.
CHAPTER 3
3 - 13