Table of Contents
Advertisement
User Manual of Thermal Bi-spectrum Network Speed dome
Network
Speed Dome
2.1.2 Activating the Speed dome
Purpose:
You are required to activate the speed dome first before you can use the speed dome.
Activation via Web Browser, Activation via SADP, and Activation via client software are supported.
In the following sections, activation via web browser and SADP will be taken as examples. You
may refer to the user manual of the speed dome for the details of activation via client software.
Activation via Web Browser
Steps:
1.
Power on the speed dome, and connect the speed dome to the network.
2. Input the IP address into the address bar of the web browser, and click Enter to enter the
activation interface.
The default IP address of the speed dome is 192.168.1.64.
3. Create a password and input the password into the password field.
STRONG PASSWORD RECOMMENDED–We highly recommend you create a
strong password of your own choosing (Using a minimum of 8 characters,
including at least three of the following categories: upper case letters, lower
© Hikvision
Switch
Figure 2-2 Connecting via a Switch or a Router
Figure 2-3 Activation Interface(Web)
Internet
NVR
7
PC
Advertisement
Table of Contents
