Configuring Dpc Settings; Picture In Picture - HIKVISION DS-2TD4166-25/V2 User Manual

User Manual of Thermal Bi-spectrum Network Speed dome

7.4.5 Configuring DPC Settings

DPC (Defective Pixel Correction) refers to the function that the camera can correct the defective
pixels on the LCD which are not performing as expected.
 Auto DPC Correction
Steps:
1. Select Auto from the modes.
2. Click to start correction.
 Manual DPC Correction
Steps:
Select Manual from the modes.
1.
Point to the defective pixel, and click
2.
Click to start correction.
3.
(Optional) Click
4.
This function varies depending on the models of speed dome.

7.4.6 Picture in Picture

Before you start:
Enter Configuration > System > System Maintenance > VCA Resource Type to select Picture in
© Hikvision
Figure 7-54 Defective Pixel Correction
to adjust the position.
to cancel the correction.
120