Ptz Configuration; Configuring Basic Ptz Parameters - HIKVISION DS-2TD4166-25/V2 User Manual

User Manual of Thermal Bi-spectrum Network Speed dome

7.3 PTZ Configuration


On the event configuration page, click

Click the direction buttons to control the pan/tilt movements.

Click the zoom/iris/focus buttons to realize lens control.

The functions vary depending on the models of speed dome.

7.3.1 Configuring Basic PTZ Parameters

Purpose:
You can configure the basic PTZ parameters, including proportional pan, preset freezing, preset
speed, etc.
1. Enter the Basic PTZ Parameter Configuration interface:
Configuration > PTZ > Basic Settings
2. Configure the following settings:
 Basic Parameters: Enable/disable proportional pan and preset freezing, set the preset speed,
keyboard control speed, and auto scan speed.
© Hikvision
to show the PTZ control panel or click
Figure 7-26 Basic PTZ Configuration Interface
99
to hide it.