User Manual of Thermal Bi-spectrum Network Speed dome
7.4 Configuring Image Settings
On the event configuration page, click
Click the direction buttons to control the pan/tilt movements.
Click the zoom/iris/focus buttons to realize lens control.
The functions vary depending on the models of speed dome.
7.4.1 Configuring Display Settings
Purpose:
You can set the image quality of the speed dome, including brightness, contrast, saturation,
sharpness, etc.
The parameters in Display Settings interface vary depending on the models of speed dome.
You can double click the live view to enter full screen mode and double click it again to exit.
Steps:
1. Enter the Display settings interface:
Configuration > Image> Display Settings
2. Select the channel No. from the dropdown list.
3. You can select the Scene in the dropdown list with different predefined image parameters.
4. Set the image parameters of the speed dome.
© Hikvision
to show the PTZ control panel or click
Figure 7-37 Display Settings
109
to hide it.