Setting / Calling A Preset - HIKVISION DS-2TD4166-25/V2 User Manual

User Manual of Thermal Bi-spectrum Network Speed dome
5. Hold down the left mouse button and drag the mouse to the upper left on the live video. The
corresponding position will be moved to the center of the live video and zoomed out.

4.4.5 Setting / Calling a Preset

Purpose:
A preset is a predefined image position. For the defined preset, you can click the calling button to
quickly view the desired image position.

Setting a Preset:
Steps:
1. In the PTZ control panel, select a preset number from the preset list.
2. Use the PTZ control buttons to move the lens to the desired position.
• Pan the speed dome to the right or left.
• Tilt the speed dome up or down.
• Zoom in or out.
• Refocus the lens.
3. Click to finish the setting of the current preset.
4. Edit a preset name by double clicking on the default name such as preset 1. (The pre-defined presets are
named already and not configurable. Please refer to the user manual for detailed function description.)
5. You can click to delete the preset.
You can configure up to 256 presets.

Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click
© Hikvision
Figure 4-6 Setting a Preset
Figure 4-7 Calling a Preset
28
to call the preset.