Fire Source Detection Configuration - HIKVISION DS-2TD4166-25/V2 User Manual

User Manual of Thermal Bi-spectrum Network Speed dome

5.3 Fire Source Detection Configuration

The functions vary depending on the models of speed dome.
YES
Enable GPS of Position
Set the north as the
Initial Position
© Hikvision
If GPS information is required for
platform accessing?
Settings
Set the VCA resource to
Fire Detection
Enable Fire Detection
(Event > Dynamic Fire Source Detection)
Enable Fire Detection Shield.
If the PTZ function is supported by the
YES
Set the application scene
and zoom parameters.
Enable the
patrol/park/linear scan.
Enable the fire point in
the Local Settings.
Start
camera?
END
54
NO
NO