Table of Contents
Advertisement
User Manual of Thermal Bi-spectrum Network Speed dome
for a certain time, the system will count the target as the background automatically. The
greater the value is, the faster the target will be counted as the background.
Minimum Target Size: Range [0-4], The system will filter out the object smaller than the
minimum target size.
Displacement Constraint for Target Generation: Range [0-4], the higher the value is, the
slower the target is generated, and the higher accuracy the analysis will get.
Scene Modes: The scene mode is set to be General by default. Select Distant View when you
are far from the targets. Select Indoor when you are indoor.
Optical-axis Movement: Check the checkbox when the target moves in the direction of
camera's optical -axis.
Single Alarm: You can enable Single Alarm, and the system only sends alarm once for one
target triggering. Otherwise, the alarm will be triggered continuously until the target
disappears.
3. Adjust the Tracking Parameters.
Post-Tracking: Range [2-600], you can configure the tracking duration after the target is still.
Back to Scene Time: Set the duration of the camera move back to original scene after
manually interrupting behavior analysis.
Restore Default: Click Restore to restore the parameters to the default.
Restart VCA: Click Restart to restart the VCA function.
6.3 Behavior Analysis
Purpose:
The speed dome supports patrol tracking for multiple scenes. At most 8 rules can be configured
for a single scene. You can configure the rules for the scene on your demand.
Steps:
1. Configure the VCA Info: For details, see 7.2 Configuring VCA Information.
2. Configure the Zooming Ratio parameters: Set the appropriate tracking zooming ratio with
the PTZ control panel. Click on
The optical camera will track the target when the VCA rule is triggered which is configured on
the thermal camera.
© Hikvision
to save the settings.
69
Advertisement
Table of Contents
