Vulcan-Hart GRS25 Service Manual page 45

REMOVAL OF BASKET LIFT CAM (OPTIONAL ACCESSORY)
1. Follow steps 1-6 under Removal of Basket Lift Back.
2. With a 1/2" wrench or socket remove the lift bar and cam assembly holding nut. (Fig. 65)
3. With an allen wrench loosen the cam set screw. (Fig. 66)
4. With an offset flat blade screwdriver remove the screws mounting the cam to the lift bar. (Fig. 65)
5. Pull the cam from the fryer. Install new cam by reversing steps 1-5.
Fig. 65
Fig. 66
45