Vulcan-Hart GRS25 Service Manual page 35

4. Separate the discard tube by sliding the rubber collar down one side of the drain tube. (Fig. 45)
Rubber
Collar
5. Move the discard pan under the ball valve.
6. With the 7/16" socket remove the clamp hardware securing the tube to the ball valve assembly. Also if the
tube/extension section is located at the end of a battery to facilitate an RO Frymate using a 5/16" socket
remove (1) bolt mounting the tube/extension bracket to the fryer base frame. (Fig. 46)
Fig. 45
Fig. 46
35