Vulcan-Hart GRS25 Service Manual page 44

6. With flat blade screwdriver remove (2) screws holding the motor to the cam bracket assembly.
(Fig. 63)
7. Remove the motor from the cooker. To install new motor reverse steps 1-6.
8. Make certain that all wiring is clear from motor cam shaft (wire ties may be required).
REMOVAL OF BASKET LIFT CAM SWITCH (OPTIONAL ACCESSORY)
1. Follow steps 1-6 under Removal of Basket Lift Backs
2. Note and remove wiring. With a standard flat blade screwdriver and a 5/16" wrench remove (2) screws and
holding nuts from the cam switch. (Fig.64)
3. Reinstall by reversing steps 1-2
Fig. 63
Fig. 64
44