Vulcan-Hart GRS25 Service Manual page 37

5. Drop the supply box housing out of the bottom of the fryer.
6. To access the controls with a 5/16" socket remove (2) screws from the power supply box
top cover. (Fig. 49)
7. Reinstall housing by reversing steps 1-6.
REMOVAL OF IGNITOR MODULE
1. Follow steps 1- 3 under Control Panel (Solid State Construction).
2. Follow steps 1-5 under Removal of Supply Box Housing.
3. With a 5/16" socket remove (2) screws and open the lid to the supply housing. (Fig. 49)
Fig. 49
4. Note and remove all wiring from the ignitor module terminals. (Figs. 50)
Figs. 50
37