Vulcan-Hart GRS25 Service Manual page 19

REMOVAL OF THERMISTOR PROBE
1. Follow steps 1-5 under Removal of Potentiometer.
2. If necessary remove burners that may be in the way of the thermistor probe hardware in the bottom of the
fryer tank. Refer to Removal of Burner.
3. With a 1/2" wrench remove the thermistor packing nut. (Figs. 15)
4. With an 11/16" wrench remove the potentiometer retaining nut from the bottom of the tank. With a 1/4" socket
from inside the fryer tank remove (2) #8 sheet metal screws. (Figs. 16)
Retaining Nut
Figs. 15
Figs. 16
19