Ex
2.3 Installing the Explosion-proof Dome
Before you start:
Make sure the device in the package is in good condition and all the assembly parts
are included.
Notes:
Do not drag the speed dome with its waterproof cables. The waterproof
performance is affected otherwise.
Do not touch the bubble directly by hand. The image blurs otherwise.
All installation operations shall be performed when the speed dome is powered
off.
Do not disassemble the speed dome.
2.3.1 Disconnecting the Cables
After testing the speed dome, disconnect the cables as shown in Figure 2-3.
Explosion-proof Dome·Quick Start Guide
Cable Entry
Junction Box
Figure 2-2 Cable Wiring Diagram
5
Connect the cable through
cable trunk or cable tray.