Table of Contents
Advertisement
Ex
6.
Install the bracket to the installation plate.
a.
Hang the safety rope to the speed dome and the hook on the bracket.
b.
Route the cables of the speed dome through the bracket and connect the
corresponding cables.
c.
Hang the speed dome to the bracket by aligning the holes of bracket with
the screws and move the speed dome downward to secure the speed
dome as shown as Figure 2-8.
7.
Secure the bracket by putting in the flat washer and the spring washer. Then
tighten the gland nut.
Explosion-proof Dome·Quick Start Guide
Three Fixing Screws
Three Preassemble Screws
Figure 2-7 Secure the Speed Dome
Figure 2-8 Install Bracket to Installation Plate
8
Advertisement
Table of Contents
