Table of Contents
Advertisement
Ex
3.
Route the cables into the bracket body. Insert three preassemble screws into the
preassemble screw holes on the cable joint (do not tighten the preassemble
screws) as shown in Figure 2-5.
Note:
The grounding stud is used for grounding connection to avoid the accumulation
of static electricity
4.
Align the bracket with the cable joint and rotate the bracket clockwise until
three preassemble screws on the cable joint hooks onto three slots on the
bracket as shown in Figure 2-6.
5.
Screw three fixing screws into the fixing screws holes on the bracket. Then
tighten three preassemble screws to secure the speed dome as shown in Figure
2-7.
Explosion-proof Dome·Quick Start Guide
Figure 2-5 Insert the Screws
Bracket
Slots
Figure 2-6 Rotate the Bracket
7
Advertisement
Table of Contents
