Table of Contents
Advertisement
Ex
5.
Screw three fixing screws into the fixing screws holes on the bracket. Then
tighten three preassemble screws to secure the speed dome as shown in Figure
2-13.
6.
Install the bracket to the installation plate.
a.
Hang the safety rope to the speed dome and the hook on the bracket.
b.
Route the cables of the speed dome through the bracket and connect the
corresponding cables.
c.
Hang the speed dome to the bracket by aligning the holes of bracket with
the screws and move the speed dome following the direction in Figure 2-14
to secure the speed dome.
7.
Secure the bracket by putting in the flat washer and the spring washer. Then
tighten the gland nut.
Explosion-proof Dome·Quick Start Guide
Three Fixing Screws
Three Preassemble Screws
Figure 2-13 Secure the Speed Dome
Figure 2-14 Install Bracket to Installation Plate
11
Advertisement
Table of Contents
