B+B Sensors DM-Compact Series Operating Manual page 88

OPEARTING MANUAL
Appendix C – Smart Averaging
The average function is generally used to smoothen the output signal. With the adjustable parameter time this function can be optimal adjusted to
the respective application. One disadvantage of the average function is that fast temperature peaks which are caused by dynamic events are
subjected to the same averaging time. Therefore those peaks can only be seen with a delay on the signal output.
The function Smart Averaging eliminates this disadvantage by passing those fast events without averaging directly through to the signal output.
Signal graph with Smart Averaging function Signal graph without Smart Averaging function
B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen
Technische Änderungen vorbehalten
Fon +49 771 83160 | Fax +49 771 831650 | info@bb-sensors.com | bb-sensors.com 88 / 88
0141 0315-100 17.08.2015