Table of Contents
Advertisement
OPEARTING MANUAL
5.6.2
Open collector output / AL2
•
The transistor acts as a switch. In case of alarm, the contact is closed.
•
A load/consumer (Relay, LED or a resistor) must always be connected.
•
The alarm voltage (here 24 V) must not be connected directly to the alarm output (short circuit).
Technische Änderungen vorbehalten
0141 0315-100
17.08.2015
B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen
Fon +49 771 83160 | Fax +49 771 831650 | info@bb-sensors.com | bb-sensors.com
64 / 88
Advertisement
Table of Contents
