Table of Contents
Advertisement
OPEARTING MANUAL
1.2
Warranty
Each single product passes through a quality process. Nevertheless, if failures occur please contact the customer service at once. The warranty
period covers 24 months starting on the delivery date. After the warranty is expired the manufacturer guarantees additional 6 months warranty for
all repaired or substituted product components. Warranty does not apply to damages, which result from misuse or neglect. The warranty also
expires if you open the product. The manufacturer is not liable for consequential damage or in case of a non-intended use of the product.
If a failure occurs during the warranty period the product will be replaced, calibrated or repaired without further charges. The freight costs will be
paid by the sender. The manufacturer reserves the right to exchange components of the product instead of repairing it. If the failure results from
misuse or neglect, the user has to pay for the repair. In that case you may ask for a cost estimate beforehand.
.
1.3
Scope of Supply
DM sensing head with connection cable and electronic box
Mounting nut
Operating Manual
1.4
Maintenance
Lens cleaning: Blow off loose particles using clean compressed air. The
lens surface can be cleaned with a soft, humid tissue (moistened with
water) or a lens cleaner (e.g. Purosol or B+W Lens Cleaner)..
Technische Änderungen vorbehalten
0141 0315-100
17.08.2015
B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen
Fon +49 771 83160 | Fax +49 771 831650 | info@bb-sensors.com | bb-sensors.com
ATTENTION: Never use cleaning compounds
which contain solvents (neither for the lens nor
for the housing).
8 / 88
Advertisement
Table of Contents
