Table of Contents
Advertisement
OPEARTING MANUAL
2.2
Electrical Specifications
Power Supply
Consumption
Outputs/ analog
Channel 1
Channel 2 [LT/ G5/ P3/ P7 only]
Alarm output
Output impedances
mA
mV
Thermocouple
Digital interfaces
Relay outputs
Functional inputs / I/O Pins
Technische Änderungen vorbehalten
0141 0315-100
17.08.2015
8–36 VDC
4M: 8-30 VDC / 5 V USB / max. 1,2 W
max. 100 mA
(For 4M output 1 and 2 are freely selectable: Analog mA/mV, Alarm mA/mV, TCK)
selectable: 0/ 4–20 mA, 0–5/ 10 V, thermocouple (J or K) or alarm output (Signal source: object temperature)
Head temperature [-20...180 °C/ -20...250 °C on 21H and 101Hot] as 0–5 V or 0–10 V output or alarm
output (Signal source switchable to object temperature or electronic box temperature if used as alarm
output)
Open collector output (NPN type) at Pin AL2 [24 V/ 50 mA]
max. loop resistance 500 Ω
min. 100 kΩ load impedance
20 Ω
USB, RS232, RS485, Profibus DP, Ethernet, Modbus RTU (optional plug-in modules)
2 x 60 VDC/ 42 VACRMS, 0,4 A; optically isolated (optional plug-in module)
F1-F3; software programmable for the following functions:
•
external emissivity adjustment
•
ambient temperature compensation
•
trigger (reset of hold functions)
Input impedance F2 and F3:
4M: I/O1-3 pins freely selectable via software
B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen
Fon +49 771 83160 | Fax +49 771 831650 | info@bb-sensors.com | bb-sensors.com
43 kΩ
14 / 88
Advertisement
Table of Contents
