Table of Contents
Advertisement
OPEARTING MANUAL
Especially if there is a big difference between the ambient temperature at the object and the head temperature the use of Ambient
Setup of the Multidrop address. In a RS485 network each sensor will need a specific address. This menu item will only be shown if a
M 01
RS485 interface board is plugged in. For using the RS422 mode, press once the down button on M01
Setup of the Baud rate for digital data transfer
B 9.6
S ON
Activating (ON) and Deactivating (OFF) of an optional Sighting Laser [►3.3 Further Accessories]. By pressing Up or Down a
voltage of 3 VDC will be switched to the 3V SW connection pin on the mainboard..
Technische Änderungen vorbehalten
0141 0315-100
17.08.2015
temperature compensation is recommended
B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen
Fon +49 771 83160 | Fax +49 771 831650 | info@bb-sensors.com | bb-sensors.com
70 / 88
Advertisement
Table of Contents
