Table of Contents
Advertisement
OPEARTING MANUAL
4.1.4
Power Supply
Please use a stabilized power supply unit with an output
voltage in the range of 8–36 VDC (4M: 8-30 VDC) which
can supply 100 mA. The ripple should be max. 200 mV.
Technische Änderungen vorbehalten
0141 0315-100
24.06.2022
The supplied USB cable can be connected to the side of the electronics box. The device can be operated
directly via the CompactPlus Connect software
The USB socket on the side is only intended for setup and service and not for continuous use
Please do never connect a supply voltage to the analog outputs as this will
destroy the output!
The CT is not a 2-wire sensor!
B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen
Fon +49 771 83160 | Fax +49 771 831650 | info@bb-sensors.com | bb-sensors.com
53 / 88
Advertisement
Table of Contents
