General overhaul .............. 12 10 Faults, causes and remedies............ 12 11 Spare parts ................ 12 12 Disposal .................. 12 12.1 Information on the collection of used electrical and elec- tronic products .............. 12 13 Copyright................... 12 Installation and operating instructions • Wilo-Drain TS/TSW 32 • Ed.01/2022-07...
The aforementioned branded products consti- potentially irreparable property damage. tute non-binding suggestions. Similar products • NOTICE! Useful information on handling the product from other brands can also be used. WILO SE Installation and operating instructions • Wilo-Drain TS/TSW 32 • Ed.01/2022-07...
Product without plug: Electrical connection turer's instructions! must be carried out by a qualified electrician! Wear protective equipment according to – the manufacturer's instructions! If in doubt, ask your specialist dealer. Installation and operating instructions • Wilo-Drain TS/TSW 32 • Ed.01/2022-07...
See rating plate Rated power See rating plate Max. delivery head See rating plate Max. volume flow See rating plate Activation type See rating plate Speed See rating plate Discharge connection Rp 1¼ Installation and operating instructions • Wilo-Drain TS/TSW 32 • Ed.01/2022-07...
Connect the discharge pipe to the pressure pipe (e.g. using a flexible hose section). Secure the connection cable to the pressure pipe and route it to the socket. ▶ Pump is installed. Installation and operating instructions • Wilo-Drain TS/TSW 32 • Ed.01/2022-07...
In the event of a fault this plosive atmospheres! may cause death by electric shock! Only activate the pump when there are no longer any persons in con- tact with the fluid. Installation and operating instructions • Wilo-Drain TS/TSW 32 • Ed.01/2022-07...
We recommend switching the reached. Dry running may destroy the seal and cause socket on and off using a separate main switch. the pump to be irreparably damaged. Installation and operating instructions • Wilo-Drain TS/TSW 32 • Ed.01/2022-07...
Strainer cleaned and fitted. Complete the cleaning work. Lift the pump by the handle out of the operating space. Loosen the hose clip and pull the pressure hose off the dis- charge port. Installation and operating instructions • Wilo-Drain TS/TSW 32 • Ed.01/2022-07...
Suction port/strainer silted/clogged ⇒ Shut down the pump, remove it and clean it. Air in the pump/pressure pipe ⇒ Position the pump at a slight angle to allow air to escape. Installation and operating instructions • Wilo-Drain TS/TSW 32 • Ed.01/2022-07...
Page 16
Local contact at www.wilo.com/contact WILO SE Wilopark 1 44263 Dortmund Germany T +49 (0)231 4102-0 T +49 (0)231 4102-7363 wilo@wilo.com Pioneering for You www.wilo.com...