Fixing The Cs To A Holder And Pole - Leica Viva GNSS Getting Started Manual

Use in high temper-
atures
1.7
Components of the
GHT62 holder
Fixing the CS field
controller and
GHT62 to a pole
step-by-step
Viva GNSS, Equipment
In high temperatures, it is desirable to increase air flow around the instrument. There-
fore the backpack can be kept half or even fully open when in use.
GS_104
To half open the backpack:
1) Open the backpack halfway.
2) Tuck the flap inside.
3) Secure it with the velcro pad.

Fixing the CS to a Holder and Pole

The GHT62 holder consists of some components, as shown in the diagram.
a
b
c
TS_058
Step Description

If you use the CS15 field controller, extend the mounting plate of the holder
first.

For an aluminium pole, fit the plastic sleeve to the pole clamp.
1. Insert the pole into the clamp hole.
2. Attach the holder to the clamp using the clamp bolt.
3. Adjust the angle and the height of the holder on the pole to a comfortable
position.
4. Tighten the clamp with the clamp bolt.
GS_106
To open the backpack completely:
1) Open the backpack completely.
2) Secure it with the velcro pad.
3) Tuck the flap under the instrument.
GHT63 clamp
d
a) Plastic sleeve
e
b) Pole clamp
c) Clamp bolt
GHT62 holder
f
d) Locking pin
g
e) Top clip
f) Mounting plate (extendable)
h
g) Bottom clip
i
h) Tightening screw
i) Mounting arm
26