Holder And Clamp For Field Controller - Leica iCON gps 70 User Manual

4.1.4
Holder for iCON CC80
Operation
5. Clamp the compression lock. The compression lock maintains
straightness.
6. Fix the holder to the clamp with the tightening screw. Before tight-
ening, ensure that the holder is at a comfortable working height and
angle. This can be achieved by sliding the clamp along the pole and
rotating the holder about the clamp. Tighten the tightening screw.
7. Insert the battery into the field controller.
8. Clip the field controller onto the holder and lock into position.
9. Turn on the antenna and the controller.
10. Run the data collection or stake-out application of the iCONstruct
Field software
☞
Refer to the iCONstruct Field software manual for further informa-
tion.

Holder and Clamp for Field Controller

a
b
c
010936_002
Clamp
a Tightening screw
b Pole clamp
c Clamping bolt
d
e
f
g
h
Holder
d Mounting arm
e Locking lever
f Mounting brackets (side)
g Mounting brackets (bottom)
h Holder for stylus
33