Leica Viva GNSS Getting Started Manual page 23

Viva Uno tripod
setup
Viva GNSS, Equipment
a
b
c
d
e
f
GS_119
Step Description
1. Set up the tripod.
2. Mount and level the tribrach on the tripod.
3. Ensure that the tribrach is over the marker.
4. Place and lock the carrier in the tribrach.
5. Screw the GNSS antenna onto the carrier.
6. Check that the tribrach is still level.
7. Insert the SD card or CompactFlash card and the battery into the CS field
controller.
8. Attach the GS GNSS antenna cap to CS field controller. Refer to the
CS10/CS15 User Manual.
9. Connect the antenna cable to the external GNSS antenna and to the GS
GNSS antenna cap.

When you are using the external GNSS antenna, ensure that you
selected the correct Rover antenna (AS05 Tripod GHM).
10. To hang the instrument on the tripod leg, use the hand strap on the rear of
the CS field controller.
11. Attach the tribrach bracket to the carrier and insert the instrument height
meter into the tribrach bracket.
12. Measure the antenna height using the instrument height meter.
13. Press the ON/OFF button on the CS field controller for at least 2s to switch
on the CS field controller.
g
h
i
a) GNSS antenna AS05
b) GRT146 carrier
j
c) Tribrach
d) GHT196 tribrach bracket for height
meter
e) GHM007 instrument height meter
k
f) Tripod
g) 1.2 m antenna cable
l
h) SD card
i) CompactFlash card
j) Viva Uno instrument (CS field
controller with GNSS cap)
k) GHT61 hand strap
l) GEB211/GEB212 battery
23