Leica Viva GNSS Getting Started Manual page 55

Viva GNSS, Leica Geo Office
Step Description
9. Browse through the folder directory and select the file or folder to import.
The file or folder can be on the computer hard drive or on the inserted data
storage device.
10. Select Import to proceed to the Assign window.
11. In the Assign window, before assigning the data to a project, the following
functionality is available:
• Select the TPS tab to preview the raw TPS data. On this page, it is
possible to select or deselect which data is assigned to the project.
• Select the GPS tab to preview the raw GPS data. On this page, it is
possible to select or deselect which data is assigned to the project.
• Select the Settings tab to modify the assign settings. The settings avail-
able depend on the type of data to be imported.
• Select the Backup button to save, if desired, the raw data from a data
storage device to the computer hard drive. Select a directory from the
browser and select OK to confirm.
• Select the Fieldbook button to generate a Fieldbook Report on the jobs
to be imported.
12. To import the data to a project:
• In the General tab, select an existing project from the list.
OR
• Create a new project by right clicking and selecting New... from the
context menu.
Select the Assign button to import the data into the selected project.
13.
55