Stakeout - Leica Viva GNSS Getting Started Manual

4.2
Objective
Staking out point
objects step-by-
step
Viva GNSS, Applications

Stakeout

Staking out point objects. To make your life easier you will define a filter before
staking out the point object. The filter will be defined the way that only points with a
certain code and those points which have not yet been staked will be available to be
staked out.

To accelerate the working example, skip the steps regarding the filters and
proceed directly with staking out the point object.
Measuring the point object
• When the code is selected, press Meas to
measure the point object.
• After the measurement has been stopped the
Enter Mandatory Attribute screen will appear
since the attribute Diameter is mandatory and is
currently blank.
• Enter a diameter of 300 (mm) and press OK to
store the point.

You have finished measuring your first point
object.

Once the point is stored then the code and
attribute value that was stored are
displayed.
Starting Stakeout
• In the Go to Work! menu, select Stakeout and
access Stakeout.
Stakeout
• Select the job which contains your point objects
to be staked out.
• Press OK to enter the Stakeout screen.
47