Leica Viva GNSS Getting Started Manual page 48

Viva GNSS, Applications
Configuring Stakeout
• Press Fn Config.. to access the Configuration
screen.
• Configure the following settings:
• General page, Quality control page and
Report sheet page: Leave all settings
unchanged.
• Heights page: Check Offset height of all
points being staked and set Height offset to
0.000 m.
• Graphics page: Set Navigate direction:
Following arrow and Navigate using: In/out,
left/right.
• Press OK to return to the Stakeout screen.
Setting up filters
• Tap on the box with the downward arrow right of
the Point ID to open the Data screen. All points
stored in the control job are shown.
• Press Fn Filter.. to access Sorts & Filters screen.
• Set Filter by: Point code.
• Press Codes.. to access Point Code Filter screen.
48