Leica Viva GNSS Getting Started Manual page 24

Viva Uno rover
setup
Viva GNSS, Equipment
a
b
c
d
GS_118
Step Description
1. Attach the GHT62 holder to the pole. Refer to "1.7 Fixing the CS to a Holder
and Pole".
2. Insert the SD card or CompactFlash card and the battery into the CS field
controller.
3. Attach the GS GNSS antenna cap to CS field controller. Refer to the
CS10/CS15 User Manual.
4. Clip the CS field controller into the holder and lock it by pushing the locking
pin into the locked position.
5. Screw the GNSS antenna to the top of the pole.
6. Adjust the height of the telescopic rod to suit.
7. Connect the antenna cable to the external GNSS antenna and to the GS
GNSS antenna cap.

When you are using the external GNSS antenna, ensure that you
selected the correct Rover antenna (AS05 Tripod GHM).
8. Press ON/OFF button on the CS field controller to switch on.
e
f
g
a) GNSS antenna AS05
h
b) Pole
c) Grip for pole
d) GHT62 holder
e) 1.2 m antenna cable
f) SD card
i
g) CompactFlash card
h) Viva Uno instrument (CS field
controller with GS GNSS cap)
i) GEB211/GEB212 battery
24