Leica Viva GNSS Getting Started Manual page 31

TPS specific icons
Viva GNSS, SmartWorx and Principles
Icon
Real-time device
Real-time status
Current active instrument Displays the instruments that are currently configured
Camera
Internet online status
Leica Exchange service
Active Assist service
Memory storage
Data management
Battery
Icon
Automatic aiming
Prism
Measure mode
Compensator level and
Instrument face I or II
Description
Displays the real-time device configured to be used.
Displays the status of the real-time device configured to
be used.
and active. When more than one instrument is config-
ured, the instrument at the front of the icon is the active
instrument.
Select this icon to begin the camera function.
Displays the Internet online status of the CS field
controller.
Displayed when the CS field controller is connected to the
Leica Exchange service.
Displayed when the CS field controller is connected to the
Active Assist service.
Displays the status of the internal memory or data
storage device.
Select this icon to open the data management pages for
Points, Lines or Areas. If there are open lines or areas,
a symbol will appear in the icon.
Displays the status and location of the battery.
Description
Displays the current automatic aiming or PowerSearch
settings.
Displays the selected prism.
Displays the selected measurement mode. The red laser
icon will display when the red laser is active.
Displays the compensator is off or out of range icons, or
the instrument face I or II icon.
31